The legendary Dodge dealer and tuner Mr. Norm has fully unveiled its pair of bad-to-the-bone Challengers, aptly named the Super Challenger and Super Cuda.
They are based on the 2009 Dodge Challenger SRT8, and first graced the public at the 2008 SEMA Show. Mr. Norm's Super Challenger gets its stunning looks from the original 1971 Mr. Norm Super Challenger Super Fuel Funny Car, while the Cuda is obviously meant to look like the classic 1970 Plymouth AAR Barracuda.
All the Super Challengers and Cudas get a modern graphics set, and can be modified to your liking. The base packages with a few interior goodies start at $3,599, but the tuner offers a slew of must-have mods that will bump that price way up.
These options include a full body kit, hood scoops, custom Hurst Shifter, Kenne Bell supercharger and intercooler, Hotchkis performance suspension (that slams the vehicle by 1.5 inches), 22-inch forged wheels and much more you can check out after the jump.
Mr. Norm also offers its flagship Legends Edition Challenger that's equipped with a Kenne Bell twin screw supercharger and a whopping 900 horses. It also gets a performance dual exhaust, leather interior, forged multi-piece wheels, carbon fiber exterior accents and AFCO adjustable coilovers. Only twelve of the Legends Edition models will roll out of Mr. Norm's Hudson, Florida garage each year the Challenger is produced.
Legends Edition
Exterior
Mr. Norms Super Cuda Grill 995.00
Labor to install 25.00
Mr Norms Super Cuda Tail Panel 429.00
Labor to install 70.00
Mr. Norm's Super Cuda Front Spoiler Paintable Overlay 399.00
Paint, prep and install 230.00
Front Spoiler, Rear Spoiler & Lower Rear Fascia with Carbon Fiber Appliqué (requires cores) 1,999.00
Labor to remove and install 350.00
Interior
Custom "Barracuda" Door Panel Inserts to match custom leather seat covers installed 499.95
Hurst Shifter Automatic SRT-8 TBA
Hurst Shifter Manual 6 Speed R/T or SRT-8 Only TBA
Mr. Norm's Super Cuda Custom Steering Wheel TBA
Powertrain
Kenne Bell Supercharger & Intercooler w/ Mr. Norm's Signature Logo in Black Anodized Finish 6,995.00
Labor to install 1,120.00
Kenne Bell Supercharger & Intercooler w/ Mr. Norm's Signature Logo in Polished Finish 7,495.00
Labor to install 1,120.00
Corsa Cat Back Dual Exhaust System 1,695.00
Labor to install 210.00
Chassis
Hotchkis Performance Suspension Lowers vehicle 1.5" 999.99
Labor to install 280.00
AFCO Fully Adjustable Coil Over Suspension 2300.00 <br>Labor to install 280.00
Modern Muscle 20" Custom Forged 2pc Wheels Set of 4 3,299.00
Mr. Norm's Super Cuda"PentaStar" 20" or 22" Custom 2pc Forged Wheels Set of 4 4,000.00
Hulst "1320" 20" or 22" Custom Forged 2pc Wheels Set of 4 6,000.00
Pirelli Tires Scorpion Zero Assimetrico Tires See Tire Notes
Note: Mount Tires on wheels, balance and reinstall tire pressure sensors from stock wheels 300.00
Tire Notes:
Pirelli Scorpion Zero Assimetrico
245/45ZR20 547.40
265/45ZR20 525.00
265/35ZR22 568.40
285/35ZR22 635.80
All prices subject to change
Custom Paint work is priced on a per job basis
Labor rate calculated at 70.00/hr plus paint material cost where applicable
estreka says:
04:40 PM, 06/17/09
The black one looks pretty badass, but the rest aren't to my liking.
Still, looks like a full package deal runs around $23K. Are you really willing to drop $23K on a Dodge?
firstwagon says:
04:52 PM, 06/17/09
Ever seen what people pay at Barrett-Jackson for Dodge Challengers and Cudas?
People will pay for something different or special.
I'd buy one these over a BMW of the same price.
the_big_al says:
06:30 PM, 06/17/09
not bad... except for the wheels. The wheels need to be about 4 in smaller.
newcar71 says:
02:51 PM, 06/27/09
Work is needed for color options for the Super Challenger. other than that... this is pretty good stuff.